Pribolab - MSS1002-5Pribolab®15-乙酰基脱氧雪腐镰刀菌烯醇-59873

<div class="certificate">
   <h2>1.&nbsp General information</h2>
        <p>This document is designed and the certified value(s) and uncertainty(ies) are determined in accordance with ISO Guide 31<sup>[1]</sup>and Eurachem / CITAC Guides <sup>[2,3]</sup>.
        </p>


  <h2>2.&nbspIntended use of the RM</h2>
        <p>- for laboratory use only</p>
        <p> - calibration of analytical instruments</p>
  <h2>3.&nbsp Instruction for the correct use of the RM</h2>
        <p>The compound should be stored at -20℃ in a dark place. Before usage of the RM , the compound should be allowed to warm to temperature(20±3℃).The recommended minimum sub-sample amount for all kinds of application is 1mg. 


         <!-- 需要改动  -->

        Certified values and uncertainties can only be guaranteed if the minimum sampling volume requirement is met.The expiry date of this RM is based on the current knowledge and holds only for proper storage conditions in the originally closed flasks/ packages.


    </p>
   <h2>4.&nbsp Hazardous situation</h2>
        <p>The normal laboratory safety precautions should be observed when working with this RM.Further details for the handing of this RM are available as safety data sheet.</p>

    <h2>5.&nbspCertified values and their uncertainties</h2>
     <table border="1" style="width:100%">
    <thead>
        <tr>
            <th colspan="3" style="text-align:center">Aflatoxin B1 </th>
        </tr>
        <tr>
            <th >Compound</th>
            <th colspan="2" style="text-align:center">Purity</th>
        </tr>
        <tr>
            <th class="sub-header" style="background-color: #fff; border-bottom: none;">Aflatoxin B1</th>
            <th style="background-color: #fff; border-bottom: none;">Certified value</th>
            <th style="background-color: #fff; border-bottom: none;">Uncertainty</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td ></td>
            <td class="value-cell">

              <!-- 需要改动  -->
            98.7%

            </td>
            <td class="uncertainty-cell">

              <!-- 需要改动  -->
            ±1.3%

            </td>
        </tr>
        <tr>
            <td colspan="3" >
            <p>The certified value is based upon the results from several analytical techniques </p>
            <p>Expanded uncertainty U (k = 2) of the value uc according to GUM <sup>[4] </sup></p>




    </td>
                </tr>
    </tbody>

</table>


   <h2>6.&nbsp Discussion of traceability</h2>
        <p>The qualitative analysis for principal component of the material is obtained by liquid chromatography-mass spectrometry (LC-MS), ultraviolet and visible spectroscopy (UV-VIS) and nuclear magnetic resonance (NMR). The certified value (purity of Aflatoxin B1) is based on the results of mass balance method and qNMR method. Structure related impurities are determined by liquid chromatography - tandem mass spectrometry (LC-MS/MS). Moisture content, inorganic impurities and volatile organic compounds are measured by Karl Fischer, ICP-MS and GC-FID respectively. Based on the above results, the purity certification value is given.</p>
        <p>All weighting and dilution steps for preparation were done using calibrated equipment (microbalances, pipettes). The gravimetric preparation furthermore was performed in a standardized and certified class A flask with stated uncertainty as well as using traceable thermometers for temperature controlled preparation. The whole preparation process is therefore traceable to SI units and metrological traceability is given.</p>
    <h2>7.&nbsp Purity assessment of Aflatoxin B1 </h2>
        <p>This calibrant is certified on the basis of gravimetric preparation[3]. Thus the certified value(mass concentration of Deoxynivalenol  is based on the weighed amount of the starting material and is therefore traceable to the stated purity of the solid raw material. High purity material represents a practical realization of concentration units, through conversion of mass to molar quantity.</p>
        <p>5.1 LC-MS/MS  </p>

        <p>The purity check using gradient LC-MS/MS of the Aflatoxin B1 sample showed one main peak after blank subtraction. </p>
        <p>5.2 HPLC-DAD/FLD</p>
        <p>The purity check using LC-DAD of the Aflatoxin B1 sample showed one main peak after blank subtraction. The peak purity of the main signal was examined by diode array spectra of the Aflatoxin B1 peak and led to the conclusion that this peak consists only of Aflatoxin B1. The purity check using LC-FLD of the Aflatoxin B1 sample showed one main peak . </p>


    <h2>8.&nbsp Further information</h2>
        <p>The purchaser must determine the suitability of this product for its particular use. Pribolab makes no warranty of any kind, express or implied, other than its products meet all quality control standards set by Pribolab. We do not guarantee that the product can be used for a special application. </p>

      <p  ><strong> Inspected by：</strong>
<img src="https://www.pribolab.cn/files/签字.png" alt="Signature" style="height: 50px; ">
  </p>
  <p style="text-align: left;">Quality System Specialist</p>